BATHROOM PLANNING GUIDE
A tub-to-shower conversion changes the tub into a shower within its existing footprint. A curbless shower removes the entry step, adding floor and waterproofing work. The right choice depends on your floor, budget and daily needs.
Request a quote
The tub comes out and a shower goes into the same footprint, often a 30 × 60-inch alcove. Entry is usually over a four- to six-inch curb or molded threshold.
The step is removed. The shower floor is sloped to a lower drain and waterproofing continues into the bathroom. A low-threshold shower, with a one- or two-inch curb, is an alternative when a fully curbless floor is not practical.
How to read these prices: All amounts below are general total-project planning estimates combining labor and materials, not Prudencio labor quotes. Homeowners purchase all materials; Prudencio helps with selection and provides a labor-only written proposal.
Combined labor and materials planning range for shower-focused conversion: tub removal and a shower in the same alcove, with plumbing kept close to its existing location and no room rearrangement.
Combined labor and materials planning premium over comparable shower work for floor recess, drain and waterproofing. Curbless is an upgrade, not a standalone shower project price.
A larger 5 × 8 premium package with a layout change, curbless entry, heated floor and glass has an estimated combined labor-and-materials planning range of $21,000–$32,000. Estimates assume a standard ceiling height, a bathroom in normal condition for its age and mid-grade finishes. Hidden damage, layout changes or premium selections can change costs; the written Prudencio proposal quotes labor only.
See Atlanta bathroom remodel costsFloor and framing: Usually leaves the existing subfloor in place and adds a curb.
Waterproofing: A pan or membrane contained by the curb.
Drain: Commonly a point drain, often kept near its existing location.
Entry: Typically a four- to six-inch curb or molded threshold.
Cleaning: A curb and glass to wipe, with water more contained.
Aging in place: A bench, blocking and handheld can help.
Best fit: A sound floor, fixed budget or hall bath.
Floor and framing: Supported subfloor panels may be recessed between joists; a slab may need cutting and a lower pour.
Waterproofing: One continuous assembly into the room.
Drain: Point or linear, often relocated and set lower.
Entry: No step, or only a fraction of an inch at the tile edge.
Cleaning: No curb, but a longer grate and wider wet footprint can require attention.
Aging in place: Removing the step helps only when the rest of the room is planned too.
Best fit: A primary bath, a floor that permits recessing or a long-term home.
Both projects begin by removing tile, substrate and the tub, then opening enough framing to inspect conditions. The difference is how much floor needs to be opened next.
For many curbless installations, supported subfloor panels are recessed between the joists so the panel surface sits at joist tops. Prudencio does not make out-of-code joist cuts or notches. A Schluter shower tray provides slope and integrated waterproofing in many cases; drain connections, seams, corners, wall junctions and surrounding-floor waterproofing are completed as one assembly.
Joist depth and direction determine whether a recess fits; slab-on-grade work can mean cutting concrete and re-pouring a lower section. A bathroom over a garage may be a candidate, but required garage-ceiling fire separation must be maintained if opened. If the recess will not work, discuss a low-threshold alternative at the walkthrough.
A curbed pan has a backstop. Curbless relies on continuous, properly lapped waterproofing at the membrane, drain flange, corners and junction with the bathroom floor. Permit scope varies by jurisdiction; confirm requirements with the local authority having jurisdiction.
A center point drain typically uses four sloped planes and mosaic tile and is usually less expensive. A linear drain can allow one sloped plane and larger tile, but often costs more in materials and setting. Both can work; the footprint, plumbing, tile and available depth guide the choice.
Read the Georgia permit guideAtlanta buyers often respond to a renovated primary bath with a generous shower. A hall bath serving children, or the only tub in the house, is a different calculation: keeping a tub may better serve families and resale.
A curbless floor eliminates the curb and can make the room feel continuous, but water may spread farther. Plan for a grate to wipe, enough glass and a floor finish suitable for a wider wet area. Both options can benefit from a bench, niche and handheld shower on a slide bar.
Explore Atlanta bathroom remodel returnRemoving the four- to six-inch step can help someone with balance difficulties, recovering from a knee replacement or planning for a parent to move in. A curbless entry alone does not make a bathroom accessible: also consider clear door width, turning space, reachable controls, seating, grab bars and slip resistance. Install grab-bar blocking before tile and discuss these goals at the first walkthrough.
A curb also helps contain water. With children or a doorless shower, plan slope, glass, an appropriate wet-area floor and a mat for splash control; do not assume the absence of a curb alone solves accessibility.
Shallow joists, joist direction or a slab that cannot be cut can make the work impractical or too costly.
The premium buys concealed floor and waterproofing work. A better valve, tile or exhaust fan may be a higher priority.
Kids’ baths, doorless showers and floors adjoining carpet need extra glass and a water-control plan.
Curbless alone does not provide adequate door width, turning space, seating, blocking or reachable controls.
If the room needs to retain its tub, replacing it with either shower is not the right project.
The floor is sound and you prefer not to open it; the room is a hall bath or rental; the budget is fixed; you want to avoid structural decisions; or another tub remains in the house.
This is a long-term bathroom, the framing or slab permits a recess, the floor is already being opened for a layout or drain change, and eliminating the step will matter for years.
Finish costs can be similar; the major difference is the floor work. Explore the construction sequence and the simpler conversion path:
The general combined labor-and-materials planning premium is $2,000–$5,000 above comparable shower work, not a standalone project price. It reflects recessed floor work, a tray, drain relocation and tying waterproofing into the room. Homeowners buy all materials; Prudencio helps with selection and quotes labor only.
No. A point drain works with a recessed floor and mosaic tile and usually costs less. A linear drain can allow one sloped plane and larger tile; the footprint, tile and available depth help decide.
No. Joist depth and direction, a slab versus wood framing, and available height at the doorway all matter. A bathroom over a garage may be possible if required fire separation is maintained. If a recess will not fit, a one- or two-inch low threshold may be the realistic alternative.
Removing the step can help, but the whole room matters: plan grab-bar blocking, a seat, reachable controls, clear floor space and a slip-resistant floor together.
It depends on the room. A large shower may appeal in a primary suite, but removing the only tub or a tub in a hall bath serving children can narrow the buyer pool. Consider retaining a tub elsewhere.
Share a photo of your bathroom and what you know about the floor structure. Discuss the options, framing considerations and floor work at your walkthrough. Homeowners purchase materials; Prudencio can help with selection and provides labor-only quotes.
Request a quote