A PRACTICAL GEORGIA HOMEOWNER GUIDE
Verify the license and insurance, then compare written scopes line by line. Ask about the permit, waterproofing and warranty; get two or three itemized quotes and never sign a scope you cannot read.
Request a quote
A bathroom can pack plumbing, electrical, waterproofing and tile into about 40 square feet. Trades overlap, and much of their work disappears behind walls or under tile. A poor waterproofing assembly can lead to concealed damage long after the job looks finished.
Ask the contractor to explain the sequence in writing: demolition, rough-in, inspections where required, substrate, waterproofing, tile, glass and trim. Georgia residential contracting is licensed at the state level; confirm the license class matches the work.
Look for six things: a current Georgia residential contractor license, insurance on paper, a written scope with exclusions, a named waterproofing system, a permit plan and a written warranty. Our full bathroom renovation service page explains our scope.
Look for an active license record matching the contract and a certificate showing general liability and workers’ compensation; request documentation before demolition.
Ask for line items for demolition, rough-in, substrate, waterproofing, tile and fixtures, plus what is excluded.
Name the system—such as KERDI, a Schluter shower tray or liquid membrane over cement board—and ask about seams, corners and the drain. Get the permit plan and labor warranty, term and exclusions in writing.
Work through the list before comparing prices; ask contractors to explain differences in writing. Our questions to ask a bathroom contractor in Georgia go deeper on the walkthrough.
1. License number on the contract matches the legal business name.
2. Request a general liability and workers’ compensation certificate dated within the last year.
3. Written scope lists brands, sizes and quantities, with exclusions separately.
4. State who pulls and pays for the permit.
5. Name the shower or tub-surround waterproofing system.
6. Specify cement board, foam board or mortar-bed substrate and joint and corner treatment.
7. Identify cast-iron or PVC drain, whether the trap changes, and flange-to-waterproofing connection.
8. Discuss GFCI circuit, fan ducted outside and any electrical box moves.
9. Discuss wet-area floor tile slip resistance.
10. Ask for a start date, rough-in inspection timing and the longest period without a working toilet.
11. Tie payments to completed milestones rather than a large upfront deposit.
12. Obtain a written warranty, punch-list process and one named contact.
The State Licensing Board for Residential and General Contractors sits under the Georgia Secretary of State. Open the state licensee search and search by the proposal’s number first, or by business name. Review the class, status, expiration date and qualifying individual.
Confirm the record is active and unexpired, that the name matches the entity signing the contract, and that you can identify and speak with the qualifying individual. Ask about an expired, lapsed or mismatched record before proceeding. Prudencio’s Residential Basic Contractor license is RBCO008765. The Board—not this guide—is the authority on what a license class may do.
Certificate of insurance: Request general liability and workers’ compensation. If the contractor says workers’ comp does not apply, ask for that in writing and check with the named carrier.
Written scope: Name waterproofing, substrate, tile sizes and fixture models; identify exclusions such as permits, dumpster, glass, drywall outside the room and hidden damage.
Written warranty and permit responsibility: Identify what is covered, what voids coverage and who repairs it. Put in writing who pulls the permit, meets the inspector and pays for re-inspection after corrections.
Material list: A labor-only proposal should provide quantities and models for the homeowner’s shopping list. Prudencio helps with selection, but homeowners purchase all materials; Prudencio’s proposals cover labor only.
Two proposals may differ because they cover different things. Compare installation scope, exclusions, materials, allowances, ordering and delivery on the same basis—not just the bottom line.
Installation labor is priced separately; the homeowner selects and buys materials. There is no contractor markup on goods they do not sell. The homeowner coordinates ordering, delivery and lead times; upgrades cost the retail difference.
Labor and materials are combined. Selections or allowances may limit choice; upgrades can trigger overages or handling charges. The contractor may arrange procurement and may include a markup.
Neither model is inherently wrong; the important point is knowing what each price includes. Prudencio helps homeowners select materials but never supplies them; homeowners buy all materials, and Prudencio quotes labor only.
For a 5×8 full-gut remodel, the original general planning range is $12,000–$21,000 combined labor and materials, not a Prudencio labor quote. Earlier illustrations cited roughly $8,000–$10,000 labor and $4,000–$5,000 materials for some scopes; those component examples total $12,000–$15,000, not the full range. Hidden conditions, layout and finishes affect costs; the written proposal establishes the labor price and scope. See the Atlanta bathroom remodel cost breakdown.
1. Firm price before inspection: A photo or doorway cannot reveal plumbing or subfloor conditions.
2. Disproportionate deposit: Payments should follow progress, with receipts.
3. Vague “install tile” scope: Ask for brand, size, pattern and substrate.
4. Mismatched license: An expired number, no result or a different name deserves an explanation.
5. Vague waterproofing: “We never had a leak” is not a method; ask about corners, the curb and the membrane-to-drain-flange connection.
Put permit responsibility in writing. Our guide to whether a Georgia bathroom remodel needs a permit explains common triggers and who decides.
Georgia licenses residential contracting at the state level, and bathroom renovation generally falls within residential basic scope. Ask for the number, look it up and confirm the class covers the project. The Board is the authority on scope.
Either may be possible depending on the jurisdiction. The contractor doing the work would normally handle the inspection sequence; document who applies, meets the inspector and handles corrections.
Two is a minimum and three is usually enough. Compare line items rather than totals and ask contractors to explain meaningful differences in writing.
Ask for two or three bathrooms completed in the last couple of years, ideally with a similar shower type. Ask past clients about the schedule, change orders and callbacks; a curbless shower reference is more relevant to a curbless project than a powder room.
Yes. Prudencio homeowners buy all materials, with selection help available. Allow about 10% extra tile for cuts and future repairs, check delivery against the schedule and confirm that drain and valve rough-in match your trim.
Prudencio Renovations is a licensed, insured working-owner contractor based in Marietta. We help with material selection; homeowners purchase all materials, and our proposals quote labor only.
Request a quote